How To Replace Battery In Subaru Key Fob

battery size for subaru key fob wernerserafino from werner-serafino.blogspot.com

If you own a Subaru, you know how important the key fob is. It allows you to lock and unlock your car, open the trunk, and even start your engine without having to insert a key. However, over time, the battery in your key fob will wear out and need to be replaced. In this article, we will show you how to replace the battery in your Subaru key fob.

Step 1: Determine the Type of Battery

The first step in replacing your Subaru key fob battery is to determine the type of battery you need. The type of battery required will depend on the year and model of your Subaru. To find out which battery you need, consult your owner's manual or contact your local Subaru dealer.

Step 2: Open the Key Fob

Once you know which battery you need, the next step is to open the key fob. To do this, you will need a small flathead screwdriver or a plastic pry tool. Insert the tool into the small opening on the side of the key fob and gently pry the two halves apart. Be careful not to damage the key fob or the battery inside.

Step 3: Remove the Old Battery

Once you have the key fob open, you will see the old battery. Carefully remove the old battery by pushing it out from the bottom with your finger or a small tool. Be sure to dispose of the old battery properly.

Step 4: Install the New Battery

Now that you have removed the old battery, it is time to install the new one. Take the new battery and insert it into the key fob with the positive (+) side facing up. Press the battery down until it clicks into place.

Step 5: Reassemble the Key Fob

With the new battery in place, it is time to reassemble the key fob. Align the two halves of the key fob and gently press them together until they snap into place. Be sure that the key ring is still attached to the key fob.

Step 6: Test the Key Fob

The final step is to test the key fob. Stand near your Subaru and press the buttons on the key fob to make sure that it is working properly. If the key fob is not working, double-check that you installed the battery correctly and that the key fob is properly reassembled.

In conclusion, replacing the battery in your Subaru key fob is a simple process that can be done in just a few minutes. By following these steps, you can keep your key fob working properly and avoid the frustration of a dead battery.